[Manufacturer Overhauled Dec 2025/Over 190,000 Yen] Omega Speedmaster Combination 175.0033 18K RG Bezel with Warranty Until 2027

🌹 Omega Speedmaster Automatic 39mm Rose Gold Combination Ref.175.0033

This is the 'Ref.175.0033', a particularly rare Speedmaster automatic model featuring a **rose gold combination** with an **18K rose gold bezel** and a stainless steel case. It is an early model **released around 1990**, and is now a rare and difficult-to-obtain timepiece.

The case diameter is 39mm. It is smaller than the manual-winding Speedmaster Professional (42mm), making it an attractive size for everyday wear.

The bezel, crown, pushers, and **entire subdials are unified in a rose gold tone**. Combined with the **black dial**, it exudes a unique charm that blends sportiness with glamour and elegance.

The movement is an ETA-based **Cal.3220** automatic. It features manual winding, hacking seconds, and a chronograph (60-second/30-minute/12-hour counter). As it is a non-date model, there is no need to adjust the date, making it easy for daily use.

This watch is especially recommended for those who appreciate a compact size, the **glamour of gold**, and the **peace of mind of official manufacturer service (Cal.3220 replacement and 2-year warranty)**.

⚠️ 【Important Special Notes】Movement and Color Uniformity

This particular timepiece has undergone a complete service by the manufacturer. During this process, the following **significant specification changes** were made, enhancing the watch's reliability and value.

・**Movement Replacement:** The original **Cal.1140** movement was entirely replaced with the successor **Cal.3220** in accordance with Omega's official procedures.
This ensures the reliability, stability, and future maintainability of the movement.

・**External Parts Uniformity:** While other models of the same type may show a slightly yellowish gold hue on the crown and pushers, this timepiece has had these parts **completely unified to the same rose gold color as the bezel** through official manufacturer service. The overall appearance is highly consistent, resulting in an **extremely refined exterior specification**.

**(Supplement)** The "DG" in the manufacturer's official model number "DG175.0033" indicates a **18K rose gold bezel** and a **stainless steel case** combination model.

🔨 Condition and Accessories

This watch has undergone a **complete service** by the manufacturer. (In addition to the movement replacement, the **entire set of hands, the crown, and the entire set of pushers were also replaced by the manufacturer**.)

Service completion date: **December 4, 2025**
**Manufacturer's Warranty: 2 years from December 4, 2025 (warranty against accuracy defects)**

The **dial has not been replaced and is in its original condition**.

The crystal is genuine Omega with the 'Ω' watermark in the center.
There are minor scuffs and hairline scratches, but the legibility of the dial is good.

The crown has the Ω mark.
The 'SPEEDMASTER' logo on the case back also remains clearly visible.

The bracelet is genuine and can accommodate a wrist size up to 186mm.

Accessories include the **complete service invoice** and the **service warranty card**. (The reference number on the invoice is the official manufacturer model number DG1750033.)

💡 【Precautions for Use】

**As this is a USED item, water resistance is not guaranteed.**
The crown and pushers are not screw-down, and the case back is a snap-back type. **Please be extremely careful with water exposure, sweat, and moisture when using the watch.**

As it is a precision instrument, please avoid dropping it or subjecting it to strong impacts.
Also, please be careful not to bring it close to strong magnetic sources such as smartphones, PCs, or magnets on bag clasps.

Cal.3220 Operation Guide

**Manual winding**: Rotate the crown upwards in its normal position

**How to pull the crown**: Gently pull the crown out by hooking your fingernail on it from the back of the case

Pulling the crown too hard may cause it to come out. Please pull it gently.
To prevent the crown from bending, please remove the watch from your wrist when operating it.
Gentle operation can reduce stress on the crown.

**Time setting**: Pull the crown and rotate it downwards

Pulling the crown will stop the small seconds hand

**Start chronograph**: Press the upper right button

**Stop chronograph**: (When started) Press the upper right button

**Reset chronograph**: (When stopped) Press the **lower right button**

Always reset the chronograph when it is stopped.
Pressing reset when it is not stopped will cause a malfunction.
Frequent use of the chronograph will accelerate wear of the parts. Please be careful.