商品説明
This is a reissue of Rado's signature model, the Golden Horse.
The "Golden Horse" gained popularity in the 1970s as a Swiss-made automatic (with hand-winding mechanism) and water-resistant (to contemporary standards) model.
The same curved dome crystal as the original is reproduced with Plexiglass, and the minute and second hands are gently curved at their tips to harmonize with the crystal.
The dial features a sunburst finish, creating beautiful gradations depending on the angle.
The dial features a "rotating anchor mark" at the 12 o'clock position to indicate automatic winding, and two seahorses at the 6 o'clock position.
The case back is engraved with two "seahorses", and the crown surface is engraved with an "anchor mark".
It features the "seahorse" engraving, a symbol of water-resistant watches.
This model is water-resistant to 10 atmospheres (100m equivalent) and features a screw-down crown and screw-back case.
(Due to being USED, water resistance is not guaranteed)
It has a hacking seconds function, quick-set date, and hand-winding, making it highly practical.
Original retail price: 132,300 yen
How to Operate
Unscrew the crown: In the normal crown position, rotate downwards
The crown screws in well.
When screwing in the crown, it is recommended to carefully find the threading and screw it in slowly to avoid stripping the threads.
Pushing the crown in slightly while turning it will align the threads and make it easier to screw in.
Hand-winding: Unscrew the crown and rotate upwards
Setting the time: Pull the crown out two clicks and rotate downwards
The second hand stops when pulled out two clicks
Quick-set date: Pull the crown out one click and rotate upwards
Operating the quick-set date when the watch is between "9 PM and 2 AM" will cause damage.
It is recommended to set the time to around 6 AM before performing the quick-set date operation.
Condition
The daily rate measured by a timegrapher is as follows:
Please consider this a reference value, as the error may vary depending on the usage environment.
Face up +9 seconds, Crown down +11 seconds
The strap has been replaced with a new Di-Modell strap, making it comfortable to wear.
The buckle is genuine Rado.
The crown screws in well.
If the crown threads are damaged, only the manufacturer can repair them.
Please handle with care to avoid stripping the threads.
Due to being USED, water resistance is not guaranteed.
Please also be careful of impacts and magnetism.
| Year of manufacture | - |
|---|---|
| Model number | R84.832.155 658.3832.4 |
| Movement | Automatic (with manual winding) Cal.2824-2 25 jewels Hacking function Date display Date quick-set (pull crown to first position and rotate upwards) |
| Material | Stainless steel |
| Size | Diameter: 35.3mm (excluding crown) Thickness: 12.2mm |
| Bracelet | New Di-Modell leather strap, 18mm (cowhide/black) Original buckle, 16mm |
| Overhaul date | - |
| Condition |
No water resistance guarantee due to pre-owned status [Case] Minor scratches remaining after polishing[Bezel] Minor scratches remaining after polishing [Crown] Screws down properly [Case back] Signs of wear [Crystal] No prominent scratches [Dial] No prominent scratches or stains [Hands] No prominent scratches or stains |
| Accessories | Includes original box, instruction manual, and manufacturer's warranty card (purchased at a domestic store in October 2013) Comes with our shop's 100-day warranty |
